What are the characteristics of candy production line packaging

What are the characteristics of candy production line packaging?

Candy making machine packaging is frequently used in packaging machines. What are the characteristics of automatic pillow packaging machines? Next, the manufacturer of the soft candy production line will introduce the features of the automatic pillow packaging machine to you. Let's follow this article

Let's take a look at the article.

It is applied to the packaging of instant noodles, biscuits, snow cakes, Shahe powder, rice dumpling, chocolate, moon cakes, ice-cream, bread, egg yolk pie, laver, napkins, soap, electric mosquito repellent incense, pharmaceutical and industrial parts, single or aggregate lumps and bulk materials

。

Main performance and characteristics of candy production line:

Siemens (PLC) programmable controller is adopted for the main control of the whole machine, which ensures the accurate, stable and reliable operation of the whole machine. The human-computer interface is displayed in Chinese, and the setting and storage are convenient and fast. The main motor is equipped with high-quality AC frequency converter to realize stepless regulation

Speed. High-precision photoelectric detection and tracking, two-way automatic compensation, reliable. The pocket length is adjusted by the toothed chain stepless transmission, which is durable, stable and accurate. Conveyor chain non-stop adjustment device, convenient and sensitive. Barycenter type automatic feeder, adjustable

It has wide scope, strong applicability, simplicity and stability. The adjustable end sealing structure makes the sealing better and eliminates the phenomenon of packet cutting.

1、 When the temperature is too high, the speed is too slow, and the heat resistance of the outer coating is poor, the seal will show signs of scorching and wrinkling. The repair method is to speed up, reduce the temperature, and replace the film material.

2、 When the cutter bed is too high or too low, the packing speed is too fast, and the push rod and cutter are not synchronized, the cutter will cut on the product for maintenance. The method is to reduce the packing speed, adjust the height of the end seal parts, and make the cutter center at the middle of the product height

Set.

3、 The color of the film color code is too light, the film drive slips, and the cut-off position deviates from the color code when the color code tracking is not turned on. At this time, the maintenance method is to refer to the packaging machine manual and adjust its sensitivity; In the man-machine dialogue interface,

Switch the tracking mode to Tracking Cut.

4、 The solid state circuit breaker is burnt out, the temperature control meter is damaged, and the temperature meter cannot control the temperature when the thermocouple is damaged. The maintenance method is to replace the electric couple, replace the temperature control meter, and replace the heating element.

5、 If the speed is too fast, the thermal sealing of the inner layer of the film is poor. If the temperature is too low, the seal will leak or be insecure. The maintenance method is to slow down the speed, raise the temperature, and replace the film material.

6、 The air pressure is incorrect, the swing rod of the cylinder is loose, the heating temperature is low, and the heat seal is poor when the hot pressing roller and the drive roller are not parallel. The maintenance method is to adjust the parallelism, adjust the temperature and air pressure to make them tight.